3D Designs . . . Exhaust Spacer Plate(s)

Here's a print of the exhaust spacer plate that I used to sell several years ago. The design is dimensionally accurate but a HUGE change was done at the waterjet company in order to cut down on costs. 

The change is that the outside contour was changed to "straighten" out the curves. That is, since that part is only cosmetic, it didn't make sense to make it look good - so the outside edge was brought out so that it's nice and straight on all 4 corners. This saved tons of money - and makes my design look different from all of the others.



Copyright 2011 Capt'n Obveeus

Joomla templates by a4joomla