3D Designs . . . Fuel Pump Adapter 


Here's a design I did of a fuel pump adapter I got in the past. It's designed to use an O-ring instead of a gasket. I sent this design out for a quote and got pricing down to about $32.00 if I had 100 of them built. Not gonna happen.

 

What is not shown is that the 2 inner mounting holes on the other side are counter-sunk.

 

 Here's a couple of pics of the actual part:

 

 

09/12/2017 

Copyright 2011 Capt'n Obveeus

Joomla templates by a4joomla
+