Print
Hits: 1739

 

Glossary . . . Hull 

Intake Vent, Lower Hull Fitting, Mounting Handle


Topic:                Glossary of various hull parts


Real Name:        Vent, Intake

Common Name:  Air intake, Air Scoop

Function:             Directs air into hull while trying to keep most of the water out

Pic:

Notes:                 Most of these crack after a few years - especially if the screws are over-tightened

                          Most do not sit flat on the hull. That is, the corners touch, but the middle bows upward a little.


Real Name:        Retainer, Steering Bearing

Common Name:  Lower hull fitting

Function:             Fitting that the Nylon steering bearing rides against.

Pic:

Notes:                 Will eventually crack if bike is ridden hard. Jumping and crashing seem to bring this on.

                          Is also a source of water intrusion into hull - should be removed and re-sealed with 5200.


Real Name:        Handle, Mounting

Common Name:  Grab Handles, side handles, lifting handles

Function:             To assist mounting of the wetbike - not for lifting

Pic:

Notes:                 The sun will dry-rot these things something fierce.

                          No longer available 

 

 

 

 09/11/2017

Copyright 2012 Capt'n Obveeus

+