Kit . . . Starter Rebuild 


Topic:             So, just what should a starter rebuild consist of? Good question - and I'll try to answer that one.


Full Rebuild

If you are doing a full rebuild, you should get the following (page 56 in parts manual):

QTY CPC            Suzuki          Description

1   10-3012-729 31312-94601 Pinion Stopper Set

1   10-3011-290 31320-95240 Bendix (Hitachi 2114-45005)

(unknown)         Upper Seal

(unknown)         Upper Bushing

2   10-3012-723 O-Rings

1   10-3012-722 Holder Assembly - Motor Brush

2   10-3012-726 O-Rings

2   10-3012-727 O-Rings

2   10-3012-724 Screw - long ones

2   10-3012-725 Screw - short ones

1   10-3014-140 Bladsder - starter (spelling in the parts book)

(unknown) Lower Bushing Seal


Quickie Rebuild

If you are just gonna do a quickie rebuild (cleanup, inspection, and reassembly) you'll probably only need the following:

QTY CPC           Description

2   10-3012-724 Screw - long ones

2   10-3012-725 Screw - short ones

1   10-3014-140 Bladsder - starter (spelling in the parts book)


Teardown How To

The teardown and rebuild process is covered in this article:

Tech - Starter Rebuild

 

 

 

09/11/2017 

Copyright 2011 Capt'n Obveeus

Joomla templates by a4joomla
+