How To Video - Clean That Fuel Pump

Parts Needed, Tools Needed, Step-By-Step, Notes

Topic:                           Short video illustrating how to clean fuel pump

Expertise Required:      Moderate

Estimated Time:            About an hour

Parts Neeed:               None - unless you'd like to put a kit in it, replace the oval gasket and/or replace the fuel hoses too

Tools Needed:             You will need the following tools:

  • Flat Blade screwdriver for the fuel line clamps (hose clamps)
  • 10mm wrench or socket to remove the fuel pump with (easier to do with the engine removed)
  • Phillips Head screwdriver for the fuel pump screws

Step-By-Step:               Here's how to get it done

  • Remove Engine (makes it easier)
  • If still in bike, disconnect battery
  • Drain fuel from carburetors
  • Pull fuel lines from pump (being careful not to break the nipples on the newer pumps)
        Pay attention and have suitable catch pan for dripping fuel
  • Remove the 2 bolts holding pump on and remove (be careful not to damage gasket or o-ring
  • Watch video

Notes and Thoughts:



Joomla templates by a4joomla