Hits: 1149



How To - Clean Those Wetbike Carburetors 

Parts Needed, Tools Needed, Step-By-Step, Adjustments

Topic:                           Cleaning and setting carbs

Expertise Required:      Moderate

Estimated Time:            Depends. If in the bike about 1 1/2 hours. If you pull the motor, about an hour.

Parts Needed:             Carburetor Cleaner (Aerosol) - Berryman's B12 or equiv.

Tools Needed:             Here's what I use:


Step-By-Step:               Carbs can be pulled in the bike or after the motor is pulled (much easier)

Begin by disconnecting the battery

(motor in the hull)

(motor pulled and on work table)

Cleanup Phase - one at a time


 Do the same with the upper carb and reinstall. 

Adjustments:                        There's very little to adjust on these carbs.


Copyright 2012 Capt'n Obveeus